10-06403-025 - MIL-STD-1553 BUS terminators are used to terminate an open BUS line on a 1553 data bus. This terminator mates to any TRB 3-lug jack. These jacks are found on almost every standard 1553 data bus coupler and relay device. Resistor is per MIL-R-39007 78 OHM +/- 1% 2 WATT.
10-06403-024 - Stub terminators are used to simulate future loads from an unspecified device on the data bus.This terminator mates with the MilesTek 10-06593 (3-lug jack to solder pot). These jacks are found on almost every standard MilesTek bus coupler and relay device. This terminator is equiped with a stainless steel chain, which is used to anchor the terminator to lab bench surfaces.
Adapters & Terminators Ohm:50 Adapter/Terminator Type:Terminator 1% 0.5W Resistor BNC RoHS Compliant
10-06403-060 - Bus terminators are typically used on the end of each data bus - 78 ohm is the most commonly used impedence.This terminator mates with the MilesTek 10-06593 (3-lug jack to solder pot). These jacks are found on almost every standard MilesTek bus coupler and relay device. This terminator is equiped with a stainless steel chain, which is used to anchor the terminator to lab bench ...